• It is an automatic, electronic device that generates chlorine from salt (on-site-electrolytic-chlorination).
• The SALTLOGIC salt water chlorinator consists of a cell, where the chlorine is produced, and a power pack, which supplies power to the cell.

• Chlorine is generated by passing mildly salted water through the cell during the normal filtration cycle and is returned to the swimming pool where it acts to purify the water.

• Salt chlorination is the healthy alternative to chlorinating your pool; the natural way.
• No further use of granular or liquid chlorine.
• No more red eyes and dry itchy skin.
• Lower maintenance and lower operating costs compared to any other chlorination method.
• Quick and easy to install.

• The OS-50 Chlorinator will handle up to 50.000 liters.
• The OS-100 model will sanitize larger pools up to 100.000 liters.
• The OS-150 Salt Chlorinator is manufactured for swimming pools up to 150.000 liters.

• A detailed version of SALTLOGIC warranty is available on the page Guarantee

• Our electrode coatings are designed for 10 000 hour life spans under normal operating conditions.
• Depending on operating conditions, expect to replace the cell every 4-6 years.
• 15 000 hour electrode material is available on request for even longer life spans.

It's easy! After installing your salt chlorinator simply:
• add the recommended amount of salt to your swimming pool
• choose your desired filtration run cycles
• choose desired chlorine output.

• SALTLOGIC salt water chlorinators are designed to operate at salt concentrations between 3 000 parts per million and up.
• A salt level of 5 000 ppm is optimum.
• Sea water, by way of comparison, is about 35 000ppm.

For more information see SALT REQUIREMENTS AND CALCULATIONS

• High purity salt is recommended.
• Iodated salt is NOT suitable.
• Consult your pool dealer for further advice.

• Yes. The amount required depends on climatic conditions, frequency of backwashing, splash-out, pool leaks and of course, pool volume.
• Salt is not lost via evaporation or during chlorinator operation.
• As a rough guide, you can expect to add between 25 - 50% of the initial amount of salt added at start-up, annually.

For more information see SALT REQUIREMENTS AND CALCULATIONS

• Nothing at all. SALTLOGIC salt chlorinators are overload and short circuit proof and will not be damaged at any salt level.
• In fact, higher salt concentrations are beneficial as they increase the chlorine output and life span of the cell.

• It's easy! Simply check the status of the 'add salt' indicator on the SALTLOGIC power pack and top up with salt when the indicator is illuminated.
• Your pool dealer will be able to test your water and advice on precise levels if desired.

• SALTLOGIC Salt Chlorinators use sealed, self-cleaning cells that remain scale free during their operation, eliminating the need for manual scale removal.
• However good an SALTLOGIC Salt Chlorinator is, remember it was developed to assist you with the maintenance of your swimming pool.

For more information see REGULAR POOL MAINTENANCE CHECKS

• No. Modern pool equipment materials will not be damaged by the low levels of salt used by SALTLOGIC salt chlorinators.
• However, should your swimming pool be more than 20 years old and have visible steel piping and fittings, then these should be replaced with PVC or other suitable plastic material.

Home : About us : Salt Water Generators : Benefits : Installation : Manual : Troubleshooting : FAQ : Guarantee

Copyright © 2004-2010. All rights reserved